ADHESIVE INSULATION 5 gal DURO DYNE

WIT-5 MFG #: 5057
Available

Duro Dyne® 5057 Resin Emulsion Water Based Insulation Adhesive, 5 gal Pail, Liquid, White, 1.18 Specific Gravity

Duro Dyne® Water Based Insulation Adhesive, Resin Emulsion, Pail, 5 gal, 9.8 lb/gal Net Weight, Liquid, White, Slight, -40 to 200 deg F, 1.18 Specific Gravity, >212 deg F Flash, 4 to 6

Duct liner is typically attached to duct walls by two fastening methods; one with mechanical fasteners and the other with adhesive. Mechanical fasteners are utilized to prevent delamination of the liner while adhesives bond the liner to the metal ensuring that air flow can not intrude between the two materials. The choice of an adhesive is affected by several factors some of which are; the method of application, acceptable dry time, solvent type. Duro Dyne WIT is a non-flammable water-based duct liner adhesive specifically formulated for spray, brush and roller coating application. WIT may be used for bonding low and high density duct liner or wrap to the interior or exterior of metal ductwork. Duro Dyne WIT is formulated to work with Duro Dyne adhesive application equipment i.e. GBAC, Super Sprayfast, Mini-Sprayfast and Rollabond.

  • Container Size
  • Type
  • Color/Finish
  • pH Range
  • Temperature Rating
  • Specific Gravity
  • Form
  • Odor/Scent
  • Flash Point
  • Net Weight
  • Container Type
5 gal
Resin Emulsion
White
4 to 6
-40 to 200 deg F
1.18
Liquid
Slight
>212 deg F
9.8 lb/gal
Pail