The Premier HVAC/R Distributor for Licensed Contractors!
LOW PRESSURE CONTROL 20in-100# 7-50# RNG
- Differential Pressure: 7 to 50 psi
- IsInactive: false
- Pressure Connection: 1/4 in Flare Nut
- Pressure Rating: 100 psig
- Series: P70
- Switch Type: SPST
- Type: Single Unit
Penn P70 Single Unit Dual Low Pressure Control, 100 psig, 7 to 50 psi Differential, 1/4 in Flare Nut, SPST Switch
Penn Dual Low Pressure Control, Single Unit, Series: P70, SPST Switch, 100 psig, 7 to 50 psi Differential, 1/4 in Flare Nut, 120/240 VAC, Universal Mount
The P70, P72 and P170 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available. Controls also are available in several different electrical ratings and switch configurations. The P72 models provide direct control of 208 to 240 volt single-phase motors up to 3 horsepower and 208 to 220 volt three-phase motors up to 5 horsepower.
- Type
- Series
- Switch Type
- Pressure Rating
- Differential Pressure
- Pressure Connection
- Voltage Rating
- Mounting Type
- IsInactive
Penn P70 Single Unit Dual Low Pressure Control, 100 psig, 7 to 50 psi Differential, 1/4 in Flare Nut, SPST Switch
Penn Dual Low Pressure Control, Single Unit, Series: P70, SPST Switch, 100 psig, 7 to 50 psi Differential, 1/4 in Flare Nut, 120/240 VAC, Universal Mount
The P70, P72 and P170 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available. Controls also are available in several different electrical ratings and switch configurations. The P72 models provide direct control of 208 to 240 volt single-phase motors up to 3 horsepower and 208 to 220 volt three-phase motors up to 5 horsepower.